• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

ZJ Steering Part #'s?

did ya try this one yet?
http://www.pirate4x4.com/tech/billavista/PDFs/Crown_Jeep_Parts_Catologue_1990-1999.pdf

52037994 TIE ROD END,(DRAG LINK W/TUBE)
ZJ 1993-96 W/ 5.2L ENG.
52037996 TIE ROD END, (RIGHT HAND THREAD)
ZJ 1993-96 W/ 5.2L ENG.
52005738 * TIE ROD END, LONG
ZJ 93-98 W/4.0L
52005739 TIE ROD END, OUTER TO KNUCKLE
ZJ 1993-96 W/ 5.2L ENG.
52005739 TIE ROD END, TO PITMAN ARM (LEFT HAND THREAD)
XJ 1994-96
ZJ 1993-96
52005739 TIE ROD END
YJ 1991-96
52005740 TIE ROD END (RIGHT HAND THREAD)
XJ 1994-96
ZJ 1993-96 W/4.0L ENG.
YJ 1991-96
52005741 TIE ROD END (LEFT HAND THREAD) TO PITMAN ARM
YJ 1991-96
52005741 TIE ROD END, OUTER TO KNUCKLE
ZJ 1993-96 W/ 4.0L ENG.
XJ 1994-96


any of thoes what you were looking for?
 
Well I tried...to dig them... Best I could come up with is ES3096 for the little piece on the drivers side wheel. And my best guess is DS1312 for the one from the link over. Im almost positive on that. I can confirm if you need me too. The adjuster is ES2079S. I have some great pics of mine...but if you want them you'll have to wait until later. Those part numbers are good at Autozone for sure..and Im sure others can use it. Prices were good at AZ... I love mine. Its much stronger than the stock XJ stuff...and adjusting the toe in is tons easier. Let me know if you have any questions about it...though it is pretty straightforward.

Justin
 
XJ_ranger said:
did ya try this one yet?
http://www.pirate4x4.com/tech/billavista/PDFs/Crown_Jeep_Parts_Catologue_1990-1999.pdf

52037994 TIE ROD END,(DRAG LINK W/TUBE)
ZJ 1993-96 W/ 5.2L ENG.
52037996 TIE ROD END, (RIGHT HAND THREAD)
ZJ 1993-96 W/ 5.2L ENG.
52005738 * TIE ROD END, LONG
ZJ 93-98 W/4.0L
52005739 TIE ROD END, OUTER TO KNUCKLE
ZJ 1993-96 W/ 5.2L ENG.
52005739 TIE ROD END, TO PITMAN ARM (LEFT HAND THREAD)
XJ 1994-96
ZJ 1993-96
52005739 TIE ROD END
YJ 1991-96
52005740 TIE ROD END (RIGHT HAND THREAD)
XJ 1994-96
ZJ 1993-96 W/4.0L ENG.
YJ 1991-96
52005741 TIE ROD END (LEFT HAND THREAD) TO PITMAN ARM
YJ 1991-96
52005741 TIE ROD END, OUTER TO KNUCKLE
ZJ 1993-96 W/ 4.0L ENG.
XJ 1994-96


any of thoes what you were looking for?

If any of those are what I need to upgrade my stock XJ steering parts, then yes. So which ones do I need from that list?
 
My numbers are the ZJ parts that will "upgrade" your steering. The tie rods from the pitman arm to the right wheel are the same...xj, zj, v8 zj...they are the same. If you call napa or another parts store they can give you part numbers too. I think my numbers are moog numbers... Or use the ones posted above...

Justin
 
Back
Top