• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

D30/Chry8.25 Regearing Write-up?

Heb80

NAXJA Forum User
Location
Harrisburg, PA
Does anybody have links to a write-up on re-gearing the Dana 30 and a Chrysler 8.25, or an axle that may be very similar?

I'm interested in learning how to regear my axles. I know most people recommend leaving it to the pro's, but I'm prepared to do alot of reading and take as much time as necessary to do it right, and I have a "pro" to help me out if I do get stuck.
 
For the first time, I would recommend having a "pro" teach you the proper way.
Much like having sex for the first time.
 
The best write-up you're likely to find is in the factory service manual (FSM).

If you don't have a FSM you should not be attempting this job.
 
Eagle said:
If you don't have a FSM you should not be attempting this job.


funny, I bet alot of the "pro's" at most off road shops have not Cracked open a FSM to do gears.
I learned in a shop class, and if I were to look for the specs I needed now, I would be looking at the manufacturers..
Check out the Gear websites.. Yukon, Dana, Currie, etc., I am sure you will find info..
 
Back
Top