PDA

View Full Version : Giveaway XJ Tools


Eagle
June 5th, 2003, 10:44
As most who were at NACFest already know, the North Atlantic Chapter banded together to buy a set of Craftsman tools for the NAXJA giveaway XJ -- which was on display at NACFest. Thanks to CHW's prodding, I hit Sears' Memorial Day sale and got a 175-piece mechanic's tool set for less than half price, plus a few additional goodies to help fill in the gaps (noteworthy among these being the proverbial BFH).

I would like to take this opportunity to thank all those who contributed to the tool fund. Contributions went both the Mike from NJ and to me, with a couple being handed to me at NACFest, so we've scrambled a bit to make up a list. I think the following list includes everyone who donated -- if not, I apologize:

Erich Damke
Mark Seidman
Harwood Loomis
Walt Stanley
Bryan Baker
Will Gajek
Bob Lester
Mike Giannone
Matt Speicer
Lou Cabral
Chris Wagner
Dave Weakland

Again, if I missed anyone I apologize. Thanks also to Dave Weakland (CountryXJer) for donating a CB radio to the giveaway XJ project.

SeanP
June 5th, 2003, 11:26
Did you remember the 36MM socket? And all the torx bits ;)

SeanP

Boz88xj
June 5th, 2003, 17:40
Dont forget t47 torx for the UCA to axle mount! :D

Damn bastards hard to find too!

xj-fx
June 6th, 2003, 06:50
What the hell is a BFH?

Eagle
June 6th, 2003, 08:04
A "BFH" is a 48-ounce Ford carburetor adjusting tool (also known in the Sears hardware department as an "engineer's hammer")

xj-fx
June 6th, 2003, 08:11
I need one of those...

Boz88xj
June 6th, 2003, 11:14
I used a BFPOP (Big Fawkin piece of Pipe) as a BFH when i installed my lfit... couldnt find my 5lb sledge... :(

mbryson
June 6th, 2003, 13:30
Originally posted by Boz88xj
Dont forget t47 torx for the UCA to axle mount! :D

Damn bastards hard to find too!


That's also called a die grinder..........{stupid fawking place for a Torx-esp. an odd sized one}