Extra Junk

2 close to new Timken wheel bearings off an '89 (50-100 miles) - $100/pr.

Carrier for a 44 and 3.92 and lower (numericaly higher) gears, no cross shaft or spiders - $40

Set of Reverse Cut 4.10's for a 44, were on the above carrier - $50

Set of 3.07 D44 gears and Trac-lok. No clue on the miles - $40

Set of good 10"X2" drums off a D35, about 5K in miles. - $40/pr

'98 Toyota Tacoma 2x4 V-6 axle, 3.15 gears. This is a good swap for a cherokee because it has the 5x4.5 pattern and the width is correct. - $250

The following stuff is from a bunch of cooling experiments I did some years back:
Modine 2-row radiator out of an '89 (closed style). Used for about 2 months and has a few bent fins where the fan clutch sits. Otherwise great condition. - $50

2 Hayden 10" s-blade electric fans, I believe they are 500-600 cfm - $20/ea

1 Scotts 10", this one is 1000 cfm - $50

1 Scotts 11", 1100 cfm - $50

Let me know if you want pics of any of this. I'm in Boise, ID 83709 and if I need to ship any of this you will be responsible for the actual shipping costs.

What kind of shape is d44 carrier in?

The carrier is basically new. It was in the front for 2 1/2 years or so. Had a lockright in it.

Let me know if you want a pic and I'll snap one tomorrow.

Thanks,
Lincoln

Wheel bearings are sold.

So would it fit a stock d44 rear

dwhiddon said:

So would it fit a stock d44 rear

Click to expand...

If you are changing gears, or already have 3.93's or lower, yes.