should I move my ebrake bracket with a 4" lift?

I

isaacson

NAXJA Forum User

Location

vancouver, wa

• Jan 23, 2005

• #1

should I move my ebrake bracket with a 4" lift? how should I adjust my ebrake cable after lifting it four inches any help would be appreciated.

 

B

Bmxpunk1369

NAXJA Forum User

Location

Bridgewater, NJ

• Jan 23, 2005

• #2

i did with a 3 inch lift but its not neccessay...just drill new holes, get some self tapping screws and move it down a couple inches. 30 secs and it gives you some good insurance.

 

G

GirlScout1

NAXJA Forum User

Location

WA

• Jan 24, 2005

• #3

Depending on what year you have, its set up in a box or the older is free running. You can always get a YJ cable which is what I did. It adds about 10" of cable to the drivers side.

 

I

isaacson

NAXJA Forum User

Location

vancouver, wa

• Jan 24, 2005

• #4

I have the newer one that has the box what do I do with that?

 

E

ecrogers

NAXJA Forum User

Location

Minneapolis, MN

• Jan 24, 2005

• #5

isaacson said:

I have the newer one that has the box what do I do with that?

Click to expand...

I had to loosen the adjusting nut that you will find in the box attached to the frame rail about halfway back. I let it out about an inch to make sure it wouldn't be pulling.