• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

gear problem

nckrawler

NAXJA Forum User
Location
high point,nc
i just setup 4:56 gears in my 8.8 and i went to put the shafts back in and the carrier pin hits the ringgear and wont come out i was wondering if anybody has ever ran into this and what did you do.
 
On the first set of 4.56s what I did is grind off a little bit on the tooth of the ring gear with a Dremel to get the pin in/out.
The 2nd set, the ring gear ended up in a place that the pin is between 2 teeth, so I didn't need to do anything.

So either you could remount the re gear, grind a bit off the tooth, or you could always grind the pin.
 
Back
Top