• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

adj. stock LCA's ??

DeftwillP

NAXJA Forum User
Location
Round Rock TX
What are the adjusting bolt located on the rear of the LCA mounts?
Better yet, why is one side of mine extended farther than the otherside?
 
You're right... the lowers can be adjusted by inserting shims in the LCA pocket as shown below...

LCA_Shims.jpg
 
I assume that these are dealer items. If I've got a bb, shouldn't I shim them out some to return the axle to its forward position?
 
Yeah, they can be purchased from the dealer. There's a thin one and a thicker one (I forget the sizes)...

However, most COMPETENT alignment shops should also have them when you take your rig in for an alignment. I was suprized to find some on mine after an alignment (before I got lower adjustables).....

Ivan
 
Back
Top