Stock '01...will I rub with discos?

[nosajwp]

Ok, if I get the '01 XJ this weekend, one of the first things I want to do will be to put swaybar discos on it. Will I get a lot of rubbing in stock form if I get the front axle really crossed up with the discos disconencted?

Also, what would you guys recommend for the rear swaybar...take it off, get discos for it too, or just leave it?

[XJJPR]

If it has stock tires it shouldn't rub.

Try taking the rear bar off and see how you like it. I didn't feel a thing without mine on.

hinkley

[Brian Carpenter]

Save your cash.. It takes about 5 minutes with a 15mm wrench to disconnect the stock front swaybar. A couple of zip-ties later and its well out of the way.

Lose the rear completely, trim 1/2 inch off the bottom inside corner of the front corner plastic "flare" and throw on 31s it'll rub on the control arms and they are strong.

Don't hit anything.
(Thats the hard part with a new Jeep)

[jeepguy97]

31s ain't gonna fit stock with out some major trimming.

[Brian Carpenter]

ya caught me..

mine's got a 2'' lift (big difference)