Rain Gutter Mounts

I am looking to build a roof rack for the xj. I wanted to get some good rain gutter clamps that I can attach to the rack. Who makes the best, the cheapest, the strongest?

I have the surco mounts. They are very strong, and are only like 30 bux for the set.

Do you happen to have the part number? I see there are lots of applications...

Sure, they are the gm-100 model

I just made up my own with some simple cutting and boogers.... usually my welds are nicer but the pieces I used to make the clamps are cut from a galvanized barn door track hanger... I ground off the galvanizing but it was still tough to weld. I have also used flat stock that I have carefully notched with the grinder, bent on the notch and then welded the notch to give it strength

Here is the most recent one I fabbed... please excuse the slight boogerage

I used Kargo Master's factory rail mounts on my custom rack and they're great. Nice and clean and very low profile. I'm sure their gutter mounts would be just as good.
http://www.quadratec.com/cgi-bin/sg...2&UREQC=3&UREQD=4&FNM=13&UID=2004071616354049