• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Overhead Console Question #2

BIGSLVRXJ

NAXJA Forum User
Location
Des Moines, Iowa
If any of you recall I was working on an overhead console project a couple weeks ago, well its still going on. To sum it up the dome lights are working but the compass temp module isn't. I needed a 12V power source to run the pink wire to and didn't find one. With you guy's help I found out that I need to run it straight to the fuse block. I took it to a wiring shop and it sounded like the guy I talked to knew less than I did but he told me he'd "take a look." I may end up needing more help but I know one bit of help I need now.Which wires can I eliminate. I do not have keyless entry so that should kill some wires. Any help on these that I could eliminate would be great.
 
the white/pink wire is batt power,(pin 13)
the black/brown is compass ground (pin 2)
black pin 4 is ground
orange/ black is compass illumination (pin 7) when headlamps are on
 
Ok that works out well thanks.
 
Back
Top