Pullin grear anti-sway ????'s.

I'm pulling my rear anti-sway off. I have the sway bar fram mounts and outer u-bolts loosened. Do I need to loosen the inner u bolts to even out the pressure or can I just pull the outer u bolts off? Words of wisdom? I also found out I have 2 broken leaf springs(or at least one of the clips that hold the packs together).

Should only have to remove the one U bolt, both nuts, to get the sway bar off, but since you have broken leafs, might as well pull both & fix the springs.

Rob

I would fix them, but my RE 4.5 with new spring packs should be coming by UPS tomorrow afternoon. woohoo. THe sway bar is off by the way, no to go test it.