• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

leaf springs

SPSERG

NAXJA Forum User
Location
Massachusetts
I am hoping to replace my 2 inch blocks with a new spring pack in the future. Currently, I have 1 inch shackles and the 2 inch angled cast iron blocks. I dont want to go over the 2 inch lift with the springs since I am going to retain the shackle. Who makes the best replacement leaf packs? In 2 inch hopefully?
 
OME (Old Man Emu).

The best. And possibly the only ones available in a 2" lift -- most start at 3"
 
I was just looking at the springs. I could only find them in 2.5 inch and medium duty. As it is now, the blocks and shackles put the rear of the Jeep at just the right level, until I start putting some weight in it. I was thinking the 2.5 OME would work, but dont see a HD version. Also, if I decide to go this way, would I need angled shims for the springs? The blocks I have are currently angled.
 
Last edited:
The heavy duty OMEs don't yield a 2" lift -- they're 3"+
 
Back
Top