• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

33's on 3.5" lift?

http://www.naxja.org/forum/search.php?searchid=99729

It takes a combination of trimming and bumpstops, and depends on the backspacing of the rim, and whether you're talking 33x12.50's, 33x10.50's, 285's (33x11.5 on 16-inch rim), etc. More of one = less of the other when it comes to trimming and bumpstops.
 
Trying to think of the easiest answer to give you, and all I can come up with is cut as far as you can in the back without cutting the pinch seam and bend the edge over. In the front, cut as far as you're willing to, the farther the better, but make sure you like the way it looks. When you're done cutting, throw the tires on there, flex it up, and add bumpstops accordingly.
 
ive got 31's on a 3 inch lift and ive scraped hard enough to dent the fender, but i do need some new bump stops so i would recommend 31s
 
Back
Top