PDA

View Full Version : Time for the sawsall

CW
April 20th, 2003, 19:26
I got my TJ flares today and I will start trimming as soon as I get my xj to run (I think the EGR is bad). Does anybody know of any good writeups on this or have any advise for me? I just want to make sure I dont mess up because once its cut off its not going back on. Thanks
Kejtar
April 20th, 2003, 20:30
good advice: where you can, cut and fold instead of cut...... :) :) that and make sure to protect it against corrosion after cutting/folding/pounding :)

Kejtar
XJHOX
April 20th, 2003, 20:40
http://jeepnorthwest.com/tech/tjflares/tjflares.html cut and paste the link should work. This helped me out when I did mine, its not hard at all.
Boz88xj
April 20th, 2003, 22:38
The fronts are a no brainer. CUt whatever you want, and/or whatever you need to.

The rears get a little trickier, also depending on whether or not you are 2 dr or 4dr. There are p[lenty of writeups on how to do it though.
aspera
September 4th, 2003, 23:35
Originally posted by Boz88xj
The fronts are a no brainer. CUt whatever you want, and/or whatever you need to.

The rears get a little trickier, also depending on whether or not you are 2 dr or 4dr. There are p[lenty of writeups on how to do it though.

Hrmm...
Maybe I can put some speed holes in the fender with a 2 inch hole saw.:D