- Location
- Yucaipa, CA
Are the front diffs in the WJs hi or low pinion? I have a bent front housing and was thinking of using the WJ knuckles. Then the thought occurred to me, why not just pick up a WJ housing??
Dan
Dan
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
WJ front?
- Thread starter Loose_Nuts_Enterprises
- Start date
xj-grin
NAXJA Member #1096
- Location
- Colorado Springs, Colorado
IIRC: Low pinion, odd-ball pattern (5 on 5) and cv shaft joints.
- Location
- Yucaipa, CA
Pinion location was my only concern since I made my own DIY D44 hub conversion, and have warn axles. I was just going to transplant the gears, locker, axles and hubs/spindles. And rebuild the CA mounts like I currently have.
When you hit a hole/ditch hard enough to make the rear wheels come 4 feet off the ground, it tends to bend things a little.:shocked:
Dan
When you hit a hole/ditch hard enough to make the rear wheels come 4 feet off the ground, it tends to bend things a little.:shocked:
Dan
