Head bolt sealer?

installing cylinder head on my 4.0 and it says to use a sealent for head bolt #11. Would regular loctite work? what about RTV sealent? can anything besides the loctite 592 be used???

good ole fashioned blue or red loctite works every time

Bolt #11 goes into the water jacket - use either LocTite PST or #545 (REALLY REALLY good pipe dope or Hydraulic sealant) or a quality plumber's pipe dope will work as well. Don't use teflon tape for this, last time, I used Harvey's Teflon Pipe Dope, since I couldn't find by bottle of 545 (but all three will work.)

If you are going to put anything on the threads of the other bolts, I suggest using never-seez instead of LocTite - once you torque the bolts, they don't go anywhere, and the ends of those bolts get pretty warm...

5-90

oh ic. would something like this work ?

http://www.partsamerica.com/PartDet...ode=PTX&MfrPartNumber=59214&CategoryCode=3289

Jeepster4wd said:

oh ic. would something like this work ?

http://www.partsamerica.com/PartDet...ode=PTX&MfrPartNumber=59214&CategoryCode=3289

Click to expand...

Good to go! If you've got it handy, it will work nicely...

5-90