• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Fabrication stuff...xfer drop, brake lines need measurements!

Tampa_XJ

NAXJA Forum User
Location
Detroit, MI
Ok decided to fabricate some parst but need some measurements from you lifted XJs... need to know the length for front and rear brake lines with a 4.5 lift...also need to know the spacer thickness for the xfercase drop....
 
sorry I can't help you, bud. But I do have a question for you - I just picked up my first xj (I've only ever owned old school chevy caprices) and I can't find the damn dipstick to check the transmission fluid - any help would be greatly appreciated
 
Tampa_XJ said:
Ok decided to fabricate some parst but need some measurements from you lifted XJs... need to know the length for front and rear brake lines with a 4.5 lift...also need to know the spacer thickness for the xfercase drop....

For the TC Drop, a piece of 1x2x.188 Rect tubing worked for me. It's about 6" long. GoJeep did a very good write up.
 
pokeyrugby said:
sorry I can't help you, bud. But I do have a question for you - I just picked up my first xj (I've only ever owned old school chevy caprices) and I can't find the damn dipstick to check the transmission fluid - any help would be greatly appreciated

Post your mesage on the OEM board, I'm sure they help ya find your DipStick, :)
 
Wrangler Brake Lines

I used stock brake lines for a 1995 Jeep Wrangler without ABS. It works fine for me, even at maximum droop.

Kevin
 
The pucks on my TC drop are 1" thick. I also used YJ brake lines. IIRC they were almost 5" longer than the stock. Sorry I don't know a total length.
 
Back
Top