PDA

View Full Version : HELLO Ya'ALL

Stoney
February 27th, 2003, 20:39
Don't we all just love jeeps! they are the best things in the whole wide world!! i don't know what i would do without one!!! i wish i had one that would be great!!! then we could all go up to the mountains and 4 wheel and hang out with our friends! and party and break down and flex out!! yea that would be a great day when we all could do that! don't u guys think so? one day i might be able to do that!!!!!!!!!!!!!!!!!!!!!!!!

:arrow: Stoney :idea: :?: :!: :?: :!: :?: :!: :!: :?: :!: :!: :?: :roll: :idea: :arrow: :idea: :arrow: :idea: :arrow: [img:b4e047b6e9]http://www.extrememopar.com/ot/friday.gif[/img:b4e047b6e9]

fadsjkfdshlblhgsdaui;lgebui;begr;iogehnbg;oehroehg ioehrg;uber
Gary E
February 27th, 2003, 21:13
It will someday, mine fought me every step of the way too, Since I didn't take the shift lever arm from the old tranny it all didn't line up right So I ground the slotted washer off the arm, bolted in on and lined it all up and welded it in place, much easier than screwing around with that hoaky adjustment garbage in the linkage. I also had to fix the stinking shifter cable with a rod end, a set screw and some JB weld, Because those nylon ends are week. For some reason my speedo doesn't work, but hey I can drive it down the road and its vibe free baby!

Did you get those stinking hydralic lines attatched?
Stoney
February 27th, 2003, 21:57
yea dude the thing is ready to go!!!!!! BUT........................ we wen't to start it and .............. nothin the batt works but when we turn the key nothin we tried to jump the starter but that doesn't seem to work??? don't understand hot that thing works!! but if i can figure out the elctrical i will be runnin?!?!?!?! hopefully

ANYONE WANT TO COME OVER AND HELP OUT WITH ELECTRICAL STUFF? CUZ I AM NOT TOO GOOD WITH THAT STUFF!

and i think somethin might be off with the NSS nuetral safty switch????

but anyways

stoney
SeanP
February 28th, 2003, 07:35
Did you take the NSS off or just disconnect the wiring harness? If you took it off, you need to line it up perfectly with the vertical line that is on the switch. A quick test it to put it in reverse and see if the reverse lights come on.

SeanP
crazy4mopar
February 28th, 2003, 15:43
[quote:312612e64b="SeanP"]Did you take the NSS off or just disconnect the wiring harness? If you took it off, you need to line it up perfectly with the vertical line that is on the switch. A quick test it to put it in reverse and see if the reverse lights come on.

SeanP[/quote:312612e64b]
I kinda have the same problem!! No reverse lights most of the time, and I have to jiggle the shifter for it to start. Where is the NSS?
SeanP
February 28th, 2003, 19:07
NSS is the 3" metal box that attaches to the pass side of the AW4. There is a bolt at around 3 oclock position that you loosen and rotate the whole unit until the vertical line is true.

www.jeepin.com has a write up with pictures.

SeanP
crazy4mopar
March 1st, 2003, 05:15
Thanks! :D