PDA

View Full Version : Front fender trim opinions


Tacowhip
September 25th, 2017, 19:30
Hey guys. I'm thinking of trimming the fender from the wheel well to the bumper. Sawzall or dremel? I want clean lines, and to keep the fender flares. Should I follow the front grill line to the wheel well? Also, what does everybody treat the exposed metal with to inhibit rust?https://uploads.tapatalk-cdn.com/20170926/c1122f64361b9828dc13f9b8ce5bce95.jpg


Sent from my iPhone using Tapatalk

Cottontail
September 25th, 2017, 19:42
I used a cut-off wheel for mine.

I didn't keep my flares though - I ditched them when I trimmed.

Green XJ Jeep
September 25th, 2017, 21:16
I used a piece of tape for a line and sawzalled it.
I trimmed it long and kept cutting until I found the length I liked which ended up just a little bit below the sides of the bumpers.

Nimrod
October 4th, 2017, 01:01
I used an angle grinder and cut-off wheel, which worked fine. And I painted the edges with Rustoleum primer to prevent rust.