PDA

View Full Version : LED Fogs to stock switch


XJTowerDog
September 24th, 2017, 15:29
Howdy.

Please don't blast me, i rarely ask for help. I searched, here and google. Not getting the most difinitive answers.

My stock fogs work. I just wired in some new 2x5 led fogs rated at 36w. I spliced the stock connectors onto the new fogs. I tested one fog by unplugging my stockie and just holding the wires of the led fog into the connector of the fog harness before doing any splicing. It lit up, but i still did have one factory fog plugged in. Now that both fogs are wired in and connected they dont want to come on. I have them wired correctly. Do i still need a relay or a resistor somewhere to make this work?

A link to a thread, a description, anything would be appreciated.

XJTowerDog
September 24th, 2017, 15:57
Jeesoos H please delete I just figured out jeeos have backwards foglight wiring:looser:

Bent
September 24th, 2017, 16:37
Jeesoos H please delete I just figured out jeeos have backwards foglight wiring:looser:
:dunce:
NOPE! This thread will live forever on the Internet. Just when you forget about being such a bone head someone will bump it back to the top.

:D

XJTowerDog
September 24th, 2017, 19:14
:dunce:
NOPE! This thread will live forever on the Internet. Just when you forget about being such a bone head someone will bump it back to the top.

:D


Ahhhh yes, sweet sweet immortality.

1990JEEPXJ
September 28th, 2017, 11:07
Early bump for some good tech info

Bent
September 28th, 2017, 14:15
Early bump for some good tech info

Even the stupid $#!t we do will help someone.

:twak: