rim width

J

jeep ride

NAXJA Forum User

Location

West Virginia 25064

• Nov 24, 2016

• #1

Any one ever ran 32x11.50x15 tires on a 7 inch wide rim [cragar d window] any problems? I have 31 10.50 on it now with no issues Thanks for any feed back.

 

T

trippled

NAXJA Forum User

Location

colorado springs, co

• Nov 24, 2016

• #2

I ran that size on my old factory wheels 15*7) they rubbed the control arms but otherwise were fine

 

J

jeep ride

NAXJA Forum User

Location

West Virginia 25064

• Nov 24, 2016

• #3

Thanks for the info I have aftermarket lower control arms on mine ran across a deal on four new master craft mxt for 500 dollars never been mounted.

 

J

Jeep Driver

NAXJA Forum User

Location

Parrottsville

• Nov 24, 2016

• #4

They should be mounted on 9 to 10 inch wheels just because you can does not make it right

 

B

bad_idea

NAXJA Forum User

Location

Virginia

• Nov 24, 2016

• #5

I have 33x12.50s on an 8" rim, as does most everyone that runs 33s. No issues after about ~2000 miles of use. 1" narrower tire ought to be fine on 1" narrower rim.

 

DansGreyMj

NAXJA Forum User

Location

Nuevo, Ca

• Nov 24, 2016

• #6

I've only ever run 12.50 tires on 8 inch wide rims, 33 and 35. You'll be just fine.

Sent from my SM-G930T using Tapatalk

 

R

RCP Phx

NAXJA Forum User

Location

Phoenix,Az

• Nov 24, 2016

• #7

I had a set of 12.50's on 7" rims for a few years, you sure won't bust a bead!

Jeep Driver said:

They should be mounted on 9 to 10 inch wheels just because you can does not make it right

Click to expand...

A 9-10" is to wide for 11.50's unless your building a beachcomber or a low-rider.