- Location
- Nashville, TN
What would y'all do to fix the contact that the sway bar link has when the wheel is turning passenger?
https://youtu.be/LeQ-qWEyXrQ
https://youtu.be/LeQ-qWEyXrQ
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Swaybar contact
- Thread starter Cottontail
- Start date
- Location
- Minneapolis, MN
Synergy Manufacturing sway bar link relocation mounts work well.
- Location
- Golden, CO
How did you accomplish that?
- Location
- Nashville, TN
Not sure. Just put the sway bar links on last week. Been running without a sway bar for a couple years. I did also recently put on adjustable UCAs and change the pinion angle.
I can't rightly decide how or why.
I can't rightly decide how or why.
trippled
NAXJA Forum User
- Location
- colorado springs, co
Did you push the entire axle forward at all?
- Location
- Nashville, TN
I did move it forward in the wheel well, but everything is attached and moves as a unit so nothing should get closer.
trippled
NAXJA Forum User
- Location
- colorado springs, co
The steering linkage would move back towards the axle if you moved the axle forward. Either move it back or relocate the mounts. Personally I'd relocate the mounts.
- Location
- Salem, OR
How is the toe setting also? Toe out and that can happen. Toe in and it won't touch. Hard to explain
- Location
- Minneapolis, MN
My 2000 did that when I went from 3.5" to 5.5" of lift. I bought a pair of the Synergy brackets, but only used one on the passenger side. I took about 20 min to cut off the old and weld on the new
