• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

CB in dash mount?

iwannadie

NAXJA Forum User
Location
Gilbert, Az
I hate posting this but searching for CB info is tricky.

Has anyone done an in dash CB mount under an aftermarket normal radio mounted.

I've seen one or two pictures of one mounted but hard to see how it was done.

For a 97 style dash...
 
Last edited:
Check this out.

http://www.cobra.com/products/recreational/c-75-wx-st

No big hole, no hassle. It works good.

this.
There's enough room to the left of the gauge clusterl to fit the box, then you can drill a hole in the center stack bezel and pop the wire through it's grommit.
When you don't use it you disconnect the handset and put it away and all you've got left is a shiny connector in the side of the dash. Very clean.
 
Back
Top