what are these grounds for on a renix?

the three black ones that are bolted to the inner fender,drivers side,under washer bottle?

nobody knows?

pic?

Headlights?
EGR relay?

One is for most of the front lighting. Another is for the fan and fan relay. The wiper and windshield washer is tied in there also.

8Mud said:

One is for most of the front lighting. Another is for the fan and fan relay. The wiper and windshield washer is tied in there also.

Click to expand...

Yup.

Click on the website below and see Tip 28.

www.cruiser54.com


From the factory wiring manual with a Ground Distribution page in it regarding lighting:

There are 2 points on the left inner fender.

There is the engine dipstick tube stud. SUPER IMPORTANT!!

There is the ground above the lower diagonal dash brace to the left of the steering column on the shiny part of the dash.

There is one in behind the trim panel where the spare tire mounts.

The one on the instrument panel grounds a ton of things. Probably too many things as a matter of fact, given it's poor mounting point on the panel with a self tapping screw. I remove the screw that it's held on with, add a wire, using 10 gauge, and terminate it to the stud near the fusebox.

There are also grounds from the engine to chassis, notably the poor one from the back of the head to the firewall but that wouldn't affect your dash lights. Not that the engine to chassis grounding shouldn't be addressed.