WesWood151
NAXJA Forum User
- Location
- New York
just like the title says, reinserting the top bolt for my steering box after a bumper install is giving me fits! Any tips?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Steering Box Top Bolt Giving Me Fits
- Thread starter WesWood151
- Start date
Loosen the other bolts.
Transpoquick
NAXJA Forum User
- Location
- illinois
That's an excellent tip.
You could also try chamfering the end of the bolt.
You could also try chamfering the end of the bolt.
- Location
- WA state
If you are still using the factory POS steering box spacer.. That is your main issue. When I installed my aftermarket bumper I could not get ALL 3 of the steering box bolts in. At the time I went with the JCR steering box spacer. From what I can tell most of the aftermarket inner spacers are basically the same. DBO, JCR, TNT, etc.
- Location
- sacramento
open the holes on the bumper up with a drill bit a few thousandths more on each, just a hair.
and/or loosen all the bumper bolts to get it move around, along with loosening the box bolts.
and/or loosen all the bumper bolts to get it move around, along with loosening the box bolts.
