• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Recognize this joint? Help! Pics...

andrew2516

NAXJA Forum User
I'm having some death wobble issues with the jeep. I just replaced ball joints and checked the tie rods. I noticed a little play in the track bar joints.

So I tore it all apart, and I cannot find the joints at all...

They look similar to a teraflex track bar joint I seen but the joints I found do not have a 2" shoulder

They are 7/8" shank 18tpi and the bore is about 1/2"

I have two of these both RH and LH thread

I would just replace them with heims but I cannot find heims in 7/8" 18tpi

If I know what kind of joints they are...maybe I can find parts to rebuild them.

Any input appreciated!





Not that it matters but here is the basic setup...Inverted T steering OTK, OTK Track Bar, these joints on both ends...
 
Are these on a trackbar or control arms ?
 
Currie maybe or ballistic ?
 
I'm pretty certain those are old school currie joints
 
Thanks guys...it's a teraflex medium monster joint for sure. I found it after searching for a while. It's usually used on control arms/ long arms. I was going to get the rebuild kit but my joint looks like an older version so I just ordered new joints.
 
Back
Top