Hi all,
I have a manual electric fan override switch on my 2000. It's is fully operational (thanks to an awesome write-up on this site: http://naxja.org/forum/showthread.php?t=1025399). I'm using a simple SPST switch to run it - flick the switch and it provides a ground signal to the relay which turns the fan on.
I want to install one of these (see below) switches in the cab. I'm not all that electrically inclined, so I could use some help wiring it up (e.g., which wire to which pin on the switch).
On my current SPST switch, I have a ground wire and a wire that runs back to the relay. How do I translate this to the pins on the switch (see diagram)? Also, how to I wire it so it lights up?
Switch:
http://www.otrattw.net/CONTURA-V-ENGINE-FAN-LOWER-LED-INDEPENDENT-V1D1JBBB-PZCEF-57T.html
Switch wiring diagram:
http://www.otrattw.com/J66a.pdf
I have a manual electric fan override switch on my 2000. It's is fully operational (thanks to an awesome write-up on this site: http://naxja.org/forum/showthread.php?t=1025399). I'm using a simple SPST switch to run it - flick the switch and it provides a ground signal to the relay which turns the fan on.
I want to install one of these (see below) switches in the cab. I'm not all that electrically inclined, so I could use some help wiring it up (e.g., which wire to which pin on the switch).
On my current SPST switch, I have a ground wire and a wire that runs back to the relay. How do I translate this to the pins on the switch (see diagram)? Also, how to I wire it so it lights up?
Switch:
http://www.otrattw.net/CONTURA-V-ENGINE-FAN-LOWER-LED-INDEPENDENT-V1D1JBBB-PZCEF-57T.html
Switch wiring diagram:
http://www.otrattw.com/J66a.pdf