JK Rubicon shocks

Quick question is anyone running the red JK Rubicon shocks. Are they long enough for a 3 inch lift kit.i measured the set I have front are about 1 1/2 longer than a set of replacement KYBs I have laying around. Also the bar pin eliminators I have are about an inch tall. That gives me 2 1/2 longer than the stock replacement shocks I have.

I had no problems running them in the stock configuration with 3" of lift. I never really measured anything, just threw them in and off I went.

I found that with shock extenders on the fronts they'll work fine although they aren't great. They're too short without some sort of extender though unless you never disconnect your swaybar.

The rears seen to work well though.

Cool thanks