School me on fuel cells

Ok, school me on fuel cells.

Im swapping and linking a rear 60 in. And i want to get the tank out from under to create some more room to push the axle back some. So I am thinking of doing a fuel cell inside the cargo area.

I found adapter rings for 97+ pumps. But i have a 95, so whats the best way to set up a fuel cell in a pre 97? I am guessing using a inline pump like the e2000. What about the sending unit?

Any advice is appreciated.

im running a summit 16 gallon cell and mallory pump, it i was to do it againg id do a RCI cell and yj sending unit like mopar maniac did, so much simpler


my setup(just to many an fittings to deal with)


Colins setup

http://naxja.org/forum/showpost.php?p=245332199&postcount=661

my junk has an RCI 18 gallon cell and an aeromotive pump.

Plumbed it right into my factory hard lines.
Factory fuel pressure regulator and all that.



I mounted the pump inbetween the cab and cell, cut a hole in the bed and ran the lines down to my factory hard lines.