• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

OME Leaf Center Pin Size

I installed the OME 3.5" leafs on my 99 XJ. IIRC, I could use the same OEM pins. However, I needed a longer pins because I was using degree shims to line up my pinion and SYE driveshaft. Hope that helps.
 
That is what I am doing. I'm installing a set of 6 degree shims and need new center pins. I can't take the current pin out to check the size because I need the Jeep to drive and get the pins from a local shop.
 
Mine required a 6 degree shim, too. I just installed some boomerang shackles and I wonder if they changed the diff angle. No vibes yet. I guess we'll see.
 
Almost certainly. Just buy bolts and round the heads off....you don't need pins.
 
I bought grade 8 5/16" bolts and rounded off the heads. It took me about an hour and a half to install the shims. All my vibrations are gone.

Thanks again!
 
You must log in or register to reply here.

Similar threads

Winterhawk
3 1/2" DPG Ultimate hybrid lift question
Replies
0
Views
89
Winterhawk
Winterhawk
D
Specific Moab Wheel On XJ
Replies
16
Views
234
DirtySouthXJ
D
B
Passenger Side Riding Low - Any remedies?
Replies
1
Views
2K
Tim_MN
Tim_MN
G
Braided Fuel Line/Fittings Size From Quick Clip to Rail
Replies
2
Views
1K
GraniteCow
G
T
CavFab adjustable trackbar (UTA) + bracket
Replies
1
Views
204
RCP Phx
R
Back
Top