jeeptec
NAXJA Forum User
- Location
- atascadero california
i finally did my tadem power brake booster conversion on my 87 XJ. i used a 95-96 booster and master. the master i bought came with the master cylinder lines and proportioning valve. i used my 87 valve as i had already cut a coil off the spring when i did my rear disc conversion. i was able to reuse one line with some tweaking and bending. i made the front line . easy to do. i found Napa had a universal 2 prong brake switch. installed the switch where the cruise cut out switch went. my cruise dosent work.so no loss there. bled the system with a vacum type bleader. i have to say this thing now stops. it would not hold in 4x4 low. now it does. well worth the time and money.