• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

'98 A/C Clutch Needed

CobraMarty

NAXJA Forum User
My A/C clutch is screeming like a baby and needs to be replaced. The compressor works fine and recently charged and blows cold but the 'screeeeeeeching' is awful.

Where can I get the clutch setup besides the dealer?
Thanks.
 
Note from DJ
This information from
http://www.sanden.com/originals/images/SD_Service_Guide_Rev.2.pdf
7.2.2 Air Gap Check
1. Air gaps exceeding 0.051” (1.3 mm) can prevent engagement. This often is noticed after the clutch and compressor temperature is heated through normal use. Refer to section 8.2.6 for more information setting correct gap.

2. If the overall gap is out of spec., remove the armature assembly and change the shims as necessary.
 
Back
Top