back bumper bolts

J

jeeptorino68

NAXJA Forum User

Location

Lebanon OR

• Mar 31, 2012

• #1

what size and thread type are the bolts for the stock rear bumper? i have a steel bumper that bolts into those stock locations
obviously they are metric thread pitch, but info on length and size would be good so i can have new ones ready when i go to put on the new bumper
thanks

 

J

jeeptorino68

NAXJA Forum User

Location

Lebanon OR

• Mar 31, 2012

• #2

ha never mind, found the info while looking at other bumper posts and info online.

M10 x 1.5 x 30mm
in case anyone else is wondering.

 

D

djgrayxj

NAXJA Forum User

Location

West Covina

• Mar 31, 2012

• #3

Note from DJ
Confirming
Rear bumper bolts
http://www.naxja.org/forum/showthread.php?t=97194

 

scoobyxj

NAXJA Forum User

NAXJA Member

Location

Coshocton, OH

• Apr 2, 2012

• #4

Do yourself a favor and replace them with stainless steel. Just about every thing I've replaced on my Jeep has been reinstalled with SS hardware, and, or with liberal coats of antiseaze.

 

N

N8N_99xj

NAXJA Forum User

Location

Berwyn Heights, MD

• Apr 2, 2012

• #5

If you use SS you still have to use antiseize - in fact it is just as important as galling can seize your stuff up just as much as rust can. i'm not sure I would use SS for bumper bolts though, those are structural, and SS isn't as strong as 8.8 or 10.9 hardware.