• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

I searched to no avail....mechanical cluster sending unit wire connector Q's

D

Don-key

NAXJA Forum User
Location
Galt Ca
I have a 1990 and bought the proper mechanical sending units (OEM) for oil and temp. But the harness connectors are different from what the sending units require. The wire harness has "push on" style spades and sending units are actual harness connections that would clip on.

What have you guys done to remedy this?
Thanks in advance
Donkey
 
Then you got the wrong sensor. The temp sensor should have a small stud for the push on style connection. The oil pressure sensor has a single spade on it
 
Since I already had the incorrect sensors bought, decided to go to pick and pull today and I found the correct harness ends.(along with a few other things I needed) Soldered them in, gauges work great!
 
You must log in or register to reply here.

Similar threads

S
'88 Temp Gauge Stuck At MAX, Even When Engine isn't Running.
Replies
2
Views
1K
Saudade
Saudade
N
Adding an electrochromic mirror to your XJ.
Replies
5
Views
835
N8N_99xj
N
kastein
Everything you ever wanted to know about the AW4
36 37 38
Replies
758
Views
412K
kastein
kastein
B
Instrument Cluster Swap Write Up
Replies
16
Views
8K
Badcop
Badcop
Back
Top