Parting 99 2 door

puttzer · Feb 20, 2012

Parting out 99 2 door, faded Chili Pepper Red paint.

4.0 with late model intake, 220k, leaks oil, runs good. $250

29 spline 8.25 with 3.55 gears and Aussie locker, complete drum to drum. $300

High pinion Dana 30, 3.55 gears, diff guard, complete with brakes. $125

Both doors are good, complete with glass and door panel. $125ea

Hood. $50

Tinted rear quarter glass. $50ea

Tinted rear window with defroster. $40

Sure Pull class three reciver hitch, no hardware. $50

Tilt steering column with cruise. $75 or complete cruise control $125

FrankZ sliders, complete with hardware. $150

4 Pro Comp shocks for 4.5" lift. $40 for all

Brake booster and master cyl. $50

PM me for interior parts, will check to see if they are good.

Parts that are bad, trans, transfer case, both front fenders, rear hatch, seats, header panel. I am keeping the lift.

Lots more, post up and will check and see if it's good.

zluster · Feb 20, 2012

What would you do for the drivers door panel and window switch(I really just want the switch and the plastic around it for my 99+MJ conversion).

zluster · Feb 21, 2012

Also, you say the seats are bad.....but are the tilt mechanisms(specific to the 2 doors) fine? I would like some for my MJ project.

puttzer · Feb 21, 2012

zluster said:
Also, you say the seats are bad.....but are the tilt mechanisms(specific to the 2 doors) fine? I would like some for my MJ project.

PM sent.

Fred · Feb 21, 2012

I'd like to buy that rear axle for the kid, but are the yokes on the 8.25 different than on the 35?

Rockken · Feb 21, 2012

Did this have a manual or an auto trans? Do you still have the rear windshield wiper switch? I also need the temp selector switch.

puttzer · Feb 21, 2012

Fred said:
I'd like to buy that rear axle for the kid, but are the yokes on the 8.25 different than on the 35?

Same Ujoint, you might have to shorten shaft.

puttzer · Feb 21, 2012

Rockken said:
Did this have a manual or an auto trans? Do you still have the rear windshield wiper switch? I also need the temp selector switch.

Auto trans, I still have both switches.

YELLAHEEP · Feb 21, 2012

zluster said:
What would you do for the drivers door panel and window switch(I really just want the switch and the plastic around it for my 99+MJ conversion).

zluster said:
Also, you say the seats are bad.....but are the tilt mechanisms(specific to the 2 doors) fine? I would like some for my MJ project.

Dammit....... ya beat me to 'em. :looney:

Rockken · Feb 22, 2012

PM sent

Joe94xj · Feb 22, 2012

Passenger side dash vent? The one by the door.

briboki · Feb 22, 2012

PM sent on the sliders.

puttzer · Feb 22, 2012

Joe94xj said:
Passenger side dash vent? The one by the door.

Will look tonight.

sserafin · Feb 26, 2012

Has the rear axle been sold off?

Thx

puttzer · Feb 26, 2012

sserafin said:
Has the rear axle been sold off?

Thx

Nope, still have it.

puttzer · Feb 27, 2012

Sliders, booster and master cylinder, drivers door panel are sold.

231 Transfer case is good, has hack and tap. $150.00

Found out transmission bell housing is cracked.

Joe94xj · Feb 27, 2012

Did you look to see if the dash vent is good? What color?

puttzer · Feb 27, 2012

Joe94xj said:
Did you look to see if the dash vent is good? What color?

Yes it is good, Agate in color. I can pull it this weekend.

Joe94xj · Feb 27, 2012

Willing to ship it my way?

AvsXJ99 · Mar 1, 2012

Are the body harness and rubber boot for the liftgate any good?

Parting 99 2 door

NAXJA Member

NAXJA Forum User

NAXJA Forum User

NAXJA Member

NAXJA Member

NAXJA Member # 1674

NAXJA Member

NAXJA Member

NAXJA Forum User

NAXJA Member # 1674

NAXJA Forum User

NAXJA Forum User

NAXJA Member

NAXJA Forum User

NAXJA Member

NAXJA Member

NAXJA Forum User

NAXJA Member

NAXJA Forum User

NAXJA Forum User

Similar threads