parts

[cody4359]

rocky road drop brackets, only ran a few months $175

96- xj gas tank skid $30

factory reciever hitch $20

factory 97+ header panel with lights wiring grill etc, 2 or 3 minor cracks $130 (black)

comanche 2wd SWB driveshaft 3.5" tube i believe, 58 1/2" ujoint to ujoint $75

[cody4359]

97+ cherokee factory header panel. comes complete, even with wiring harness. 2 or 3 minor cracks (1 upper 2 lower) $120
http://i1128.photobucket.com/albums/m484/cody4359/grand%20cherokee/jeep005.jpg

96- chrome bumper with plastic extension thingys, good condtion $50
http://i1128.photobucket.com/albums/m484/cody4359/grand%20cherokee/jeep003.jpg

flowmaster 40 2.5" in and out i believe $20
http://i1128.photobucket.com/albums/m484/cody4359/grand%20cherokee/jeep004.jpg

factory gas tank skid from 96 cherokee $20
http://i1128.photobucket.com/albums/m484/cody4359/grand%20cherokee/jeep007.jpg

rocky road control arm drop brackets. used for maybe 2 months then put my cherokee on its roof. comes with hardware $170
http://i1128.photobucket.com/albums/m484/cody4359/grand%20cherokee/jeep008.jpg
http://i1128.photobucket.com/albums/m484/cody4359/1996%20cherokee/lift.jpg
29 spline 8.25 no diff cover or axles. basically just housing free
http://i1128.photobucket.com/albums/m484/cody4359/grand%20cherokee/jeep009.jpg

i believe a waggy 44 19 spline axles and WMS was 62.5 or 63" if i rember right $75
http://i1128.photobucket.com/albums/m484/cody4359/grand%20cherokee/jeep010.jpg

4.56 used gears and lunch box locker $175
http://i1128.photobucket.com/albums/m484/cody4359/grand%20cherokee/jeep014.jpg
http://i1128.photobucket.com/albums/m484/cody4359/grand%20cherokee/jeep013.jpg
Ballistic fab rear 44 cover, new and unpainted $90
http://i1128.photobucket.com/albums/m484/cody4359/grand%20cherokee/jeep015.jpg

SUA mj dana 44 with 4.56 and eaton E-locker with new harness and swithch, comes with perches to make SOA and i have a set of shock tabs $1000
http://i1128.photobucket.com/albums/m484/cody4359/grand%20cherokee/jeep016.jpg
http://i1128.photobucket.com/albums/m484/cody4359/grand%20cherokee/jeep006.jpg

[dick.breakey]

the gears and locker for the 44 or 8.25 or what? didnt catch it in there.thanks.

[cody4359]

my bad, there for a hp dana 30

[cody4359]

also have 2 hp dana 30's for sale

one has crack in weld on the lower control arm. will come with brakes and shafts, currentley no carrier or gears. $100

the other is the axle that i just welded the C gussets on. its a 96, newer balljoints (maybe a year of driving) and will come with a inner sleeve kit (not installed yet) also brakes and shafts. $200

either one can come with a stock carrier and 3.55 gears

or im thinking of sleeving the dana 30 and installing a rebuilt arb rd100 with 4.56 for 950

[Dads XJ]

2 pm's sent

[cody4359]

8.25 housing is gone, dana 30 housing with cracked control arm mount is gone. extra set of dans 30 big joint shafts $70

[cody4359]

havent had any takers on the arb or 44 so the new plan is to keep them for a later project down the road.

[dick.breakey]

Man I wish you would have poste those earlier. I just locked my 30 and I need gears in the 4.56 flavor too.

[dick.breakey]

Is the carrier include with the locker gear setup? If so I'll go ahead and take it actually.

Dick
682.433.9930

[cody4359]

meant to throw in that the 4.56 are going on the ARB. few people ahead of you on the locker, and im waiting to hear back from powertrax to see if its a lockright or no slip and if it needs any repairs, so there will be a new price on it once i figure out what it is etc

[cody4359]

drop brackets and flowmaster are sold

[cody4359]

header panel sold
still have bumpers, gas tank skid, LWB driveshaft

also have base model 97+ guage cluster (idiot lights, 47k mi) and bezel that surrounds it that has water temp guage, volt guages in it

[cody4359]

ARB mini compressor $75