PDA

View Full Version : NWC Barter Town


Bronzewyrm
November 13th, 2011, 18:07
Well im alwase herassing people about trade. i figure id start a thred aimed at just that. so

If you have skills, services, or parts to offer up in trade. Looking for a part, or have one of the parts being looked for here. Post up, Pm, or call. be shure to update as it goes along o people know what is or isnt still on the market.

ill start.

im looking for:

d30 LP gears 4:56
8.25 gears 4:56
305/70/16 m/t tires
ACOS
Shackel relocation backets "Rear"
front shocks "good ones" balstines, ome ect... 4-6" of lift
rear shock relocation brackets
long arm kit and belly pan
trac bar and drop bracket 4-6" lift.
NP231 with SYE "Fresh" with DS preferd

i have a feiw parts to trade.

front safts D30 297x inner/outers, one set with one set without uni berings
xj 4dr. Warrior Tube doors
31" 10.5 r15 hurclules M/Ts on steel chrome wheels. not letin them go easly...

And for thoes who dont know i do high end paint work for a living, and on the side. i have a large shop neer salem. we started as an RV repair facility but since have evolved back twards cars. (my natural trade)

i do offer up services in return for some of the things listed. and at the same time trying to set the example for future posts. agin if you dent the wifes car, back up into somebody at the quickie, or have a run in on the way to a trail:roflmao:let me know ill do it chep or for trade if you got something good.

i know theres a feiw who can weld, some with tubebenders and skills. parts hookups, loose morals, i painted a yj for WarriorProducts. got me a pyle of parts for the xj:thumbup: w/e the case may be, post it, if you can sacrafice it to trade.

Wheel on!
Bronze.

BoringDave
November 14th, 2011, 16:51
Pm sent

robanddee2
November 14th, 2011, 16:55
I have a 8'' stroke hydro assist ram willing to sell or trade! Its off of a forklift. They work really well my buddy used the exact same ram on his d44 worked great! I really am needing a set of steel wheels for 5x4.5 jeep. I also have 2 sets of wheels and tires one set is stock jeep wheels with low tread tires the other are ford ranger wheels alluminum.

OrangeJeep
November 14th, 2011, 17:47
I have a 8'' stroke hydro assist ram willing to sell or trade! Its off of a forklift. They work really well my buddy used the exact same ram on his d44 worked great! I really am needing a set of steel wheels for 5x4.5 jeep. I also have 2 sets of wheels and tires one set is stock jeep wheels with low tread tires the other are ford ranger wheels alluminum.


How much for ram? I might be interested.

BoringDave
November 14th, 2011, 19:49
I have a 8'' stroke hydro assist ram willing to sell or trade! Its off of a forklift. They work really well my buddy used the exact same ram on his d44 worked great! I really am needing a set of steel wheels for 5x4.5 jeep. I also have 2 sets of wheels and tires one set is stock jeep wheels with low tread tires the other are ford ranger wheels alluminum.

What wheels are the stock ones with low tread and how much? I may need rolling stock for when I start parting my junk out.

Dave

robanddee2
November 15th, 2011, 10:09
I would like to get $50 for the ram and $150 for the tires and wheels!

robanddee2
November 15th, 2011, 10:11
sorry so big I dont know what is up with my computer. but its really pissing me off!!!!
I do have the 4th wheel and tire its in my jeep as spare. But goes with set! By the way they are 31x10.5x15 5 on 4.5

dick.breakey
November 15th, 2011, 10:14
I need my traditional two car garage drywalled and tape/bed'd. Or however you spell that. I'll buy materials if someone can provide the labor and I'll exchange the labor for some greenbacks. Prefer to do this this week or early next. Let me know if you have the skills or know someone who does, as I'd really appreciate it. Thanks!

Dick
682.433.9930


Sent from your subconscious without you knowing.....

robanddee2
November 15th, 2011, 10:47
http://i780.photobucket.com/albums/yy89/elevationoffroad/wheelsandtires.jpg (http://i780.photobucket.com/albums/yy89/elevationoffroad/wheelsandtires.jpg)

dick.breakey
November 15th, 2011, 12:18
I now see a whole lot of one pic haha


Sent from your subconscious without you knowing.....

robanddee2
November 15th, 2011, 12:22
if interested in tires/wheels or hydro ram call or text (503) 502-6628

jonesinxj
November 15th, 2011, 20:33
I need my traditional two car garage drywalled and tape/bed'd. Or however you spell that. I'll buy materials if someone can provide the labor and I'll exchange the labor for some greenbacks. Prefer to do this this week or early next. Let me know if you have the skills or know someone who does, as I'd really appreciate it. Thanks!

Dick
682.433.9930


Sent from your subconscious without you knowing.....

Dick,


I have a friend that does drywall for a living, PM me If you interested. I'm not sure what kind of cost would be involved for a garage.

moneypit_k5
November 20th, 2011, 21:37
to op or anybody else... I have a nearly new-but missing a few parts rubicon 5.5" longarm setup I would be willing to trade for a pro paint job on a Comanche short box.