• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Valve Cover breather tube gasgets (renix)

Mike1331

NAXJA Forum User
Location
Folsom, CA
I'm trying to locate two triangle gaskets for the breather galleys that unbolt from the underside of the valve cover. I can't seem to find them at a parts store.
Has anybody replaced these? How do i find them?
 
ok i thought you were referring to the tubes when you said you left them off but you were referring to the gaskets...? I've already cut 1.5"s off the tubes to eliminate oil suction as well. .
 
The factory recommended fix was to also drill a 1/2" hole in the rear side of each tube about half way between the top of it and the bottom which you've cut off. But, they recommended cutting only 1/2" off the bottom. I think you'll be fine with just what you've done.
 
Back
Top