Track bar question

Did a 2in lift year or so ago. Put 2in spacer in the front but removed the stock isolator. So I ended up with a 1 1/2in lift in the front. It pulled just a tiny bit to the right. Changed the front diff. the other day and added the isolators back in while I had it apart. Pulls a little more right. Will moving the trackbar bolt the 1/4in. or so that it needs to center the diff. cure the pull to the right?

Here is a basic rule of thumb for front-end stuff:
You change ride height or linkage= get an alignment.

You could also try to do it yourself-
Be careful with it, torque the nuts/bolts to spec and never re-use a cotter pin.


I think I heard Firestone has a lifetime alignment deal for under $200....