• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Neutral Position Switch Connector

Mr Spock

NAXJA Forum User
Location
Columbus Ohio
OK, I have diagnosed that my NPS is acting up. In the FSM it states to do a continuity check between different pins on the connector. However, I cannot seem to find said connector. There are clearly wires going into the NPS but it looks like these wires enter via a plastic piece that is molded into the NPS rather than a connector. Should I be looking someplace else for this connector?

97 XJ, 4L, NP231, AW4

Thanks
 
It's Neutral Safety Switch aka NSS. The connector is about a foot up towards the engine bay. If you follow those wires you'll find the connector. If it's still factory the wires and connector may be zip tied to other components. Cut the zip ties, undo the connector (leaving the NSS attached to tranny) and do your testing.
 
Back
Top