ok i have a 98 cherokee gauges worked then one morning went to fire it up and the gauges are dead. I have checked like everything the only thing that works is directional lights and high low beam indicator the jeep runs fine but just no instrument cluster
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
no gauges
- Thread starter kenney180
- Start date
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
Search for " no-bus",and pound on the dash!!!!
CharlesS
NAXJA Forum User
- Location
- Quezon Province, Philippines
IF the problem is the bus connectors that the instrument cluster plug into then you can try what has worked for me the past 12 years.
Using the directional selector with the ignition in the ON or RUN position make a right turn and the gauges should respond again. IF they don't then I would start checking for a blown fuse in the fuse panel behind the kick panel on the passenger side.
Using the directional selector with the ignition in the ON or RUN position make a right turn and the gauges should respond again. IF they don't then I would start checking for a blown fuse in the fuse panel behind the kick panel on the passenger side.
