John D
NAXJA Member # 788
- Location
- Rockford, Mi
Anybody know how many amps the factory fuel pump relay is rated for on a 1998? Either it has never been asked or I suck at searching because I can't find it.
Thanks,
John
Thanks,
John
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Fuel Pump Relay
- Thread starter John D
- Start date
RNMedic
NAXJA Member #659
- Location
- Dayton, Ohio
I think they are standard Relays so probably 30 amps
John D
NAXJA Member # 788
- Location
- Rockford, Mi
The FSM says to replace the fuel pump if the current draw reaches or exceeds 10a, so I wonder if they use a lower rated relay. I installed a Walbro 255lph pump in-tank and I am having issues where it will stop working. When I power on all I hear is a click from the pump. I was able to get the pump to run on a bench. The Walbro says it draws 12-13a, I am trying to determine if the new pump is bad or overloading the relay capabilities.
RNMedic
NAXJA Member #659
- Location
- Dayton, Ohio
Might be I found a listing on autozone, and it didn't specify the size, but it looked like a standard relay
- Location
- Rainy side of Washington
it's a pretty standard mini ISO relay, I'd bet on 20 to 40 amps, probably 20 or 30.
Poke around a bit with the DMM and FSM when it shuts off and find out where the power stops?
Poke around a bit with the DMM and FSM when it shuts off and find out where the power stops?
