WTB D30

[r33pwrd]

Looking for a non vac D30 to have build. Needs to be in rebuildable condition with all the brackets for a short arm kit still there.

Prefer Seattle area.

Thanks

[AwesomeXJ]

I've got a striped down d30 ready to be built. It was a vac but thats all gone now. no axles, calipers, hubs or gears, $60

[redrider2911]

I have one but UCA mounts are cut off and replaced with a new passenger UCA mount for my 3 link.

[BenDiesel]

I have a vac one with ecery thing minus knuckles and bearings. Free you come get

[r33pwrd]

OK so I have a good working vac one but John @ auburn auto says to pick up a non vac one so he can build it for me... is there a reason for this?

[Avanteone]

OK so I have a good working vac one but John @ auburn auto says to pick up a non vac one so he can build it for me... is there a reason for this?

The non vac. disco housings are much easier to work with, and the axle seals are better. Putting non-disco shafts in a disco housing requires a funky seal that was never done by the OEM and it doesn't work as good. Nice complete housings can be found for $100 ish, you're better off holding out for one. If nothing else, the Spanaway Moonshiners swapmeet is March 13th at Puyallup fairgrounds, I'm sure you could find one there.

J

[r33pwrd]

The non vac. disco housings are much easier to work with, and the axle seals are better. Putting non-disco shafts in a disco housing requires a funky seal that was never done by the OEM and it doesn't work as good. Nice complete housings can be found for $100 ish, you're better off holding out for one. If nothing else, the Spanaway Moonshiners swapmeet is March 13th at Puyallup fairgrounds, I'm sure you could find one there.

J


Thanks man! So im on the hunt for a non vac one still :)