Icemans
January 20th, 2011, 22:27
Well I was working on the Garage tonight and thought I really don't need this stuff any more. This is just a feeler but I'm willing to give this stuff up so let me know what you think.
I have some rear side glass out of a 97 XJ they are factory tinted and they don't seem to have any blemishes from me carrying them around for the past year. I would like to get $60.00 for the pair or $40.00 each. I'm willing to neg a little bit on these. I don't know what they are worth new or from the J/K but if I can't get decent money out of them then I will just keep them.
http://i386.photobucket.com/albums/oo310/allen_wrench1000/naxjaforsale001.jpg
http://i386.photobucket.com/albums/oo310/allen_wrench1000/naxjaforsale002.jpg
I have three rod ends that are RE-941 MXM-14-12 Midwest Control Chromoly 7/8" Rod End with 3/4" bore Thread Hand: Right Hand Thread They have only been used for mockup so they have never had any pressure against them. I also have the three TA-224-1 7/8" -14 tpi Tube Adapter Tube Inner & Outer Diameters: Size 6: 1.5 in ID - 1.75 in OD - $2.00 Thread Hand: Right Hand Thread that go with them. They do have a tack mark on them from being tacked to my mock up control arms but they were never fully welded. The whole package new from Ballistic Fab cost me $24.19 before tax and freight. I would be happy if I could get $20.00 a pair. I will pay UPS ground to ship them to you unless you live in
the Portland area then I will deliver.
http://i386.photobucket.com/albums/oo310/allen_wrench1000/naxjaforsale004.jpg
http://i386.photobucket.com/albums/oo310/allen_wrench1000/naxjaforsale005.jpg
I have a Radiator that came out of a 98 XJ with an automatic. The jeep was in a wreck. I took it out because I thought it was part of my cooling problem well needless to say I was wrong. It does have some spots were the electric fan fell into it and belt some of the fins but the water rails seem to be fine. It is bent just a little bit but mounted up just fine and held water at 16lbs of pressure. I will guarantee this Radiator will not leak if it does I will give you your money back. I am asking $15 for it OBO.
http://i386.photobucket.com/albums/oo310/allen_wrench1000/naxjaforsale006.jpg
http://i386.photobucket.com/albums/oo310/allen_wrench1000/naxjaforsale007.jpg
http://i386.photobucket.com/albums/oo310/allen_wrench1000/naxjaforsale008.jpg
Last but not least is a New High lift jack cover. It does not fit my 60" jack it measures out to 53" so I bought a Neopream cover for mine. It has never been used and as been in the bottom of my tool box for two years. The cheapest I found this product online for was $25 and change. I would be will to take $20 for it and I will ship it.
http://i386.photobucket.com/albums/oo310/allen_wrench1000/naxjaforsale003.jpg
Let me know what you think and if you have any questions I can answer them.
I have some rear side glass out of a 97 XJ they are factory tinted and they don't seem to have any blemishes from me carrying them around for the past year. I would like to get $60.00 for the pair or $40.00 each. I'm willing to neg a little bit on these. I don't know what they are worth new or from the J/K but if I can't get decent money out of them then I will just keep them.
http://i386.photobucket.com/albums/oo310/allen_wrench1000/naxjaforsale001.jpg
http://i386.photobucket.com/albums/oo310/allen_wrench1000/naxjaforsale002.jpg
I have three rod ends that are RE-941 MXM-14-12 Midwest Control Chromoly 7/8" Rod End with 3/4" bore Thread Hand: Right Hand Thread They have only been used for mockup so they have never had any pressure against them. I also have the three TA-224-1 7/8" -14 tpi Tube Adapter Tube Inner & Outer Diameters: Size 6: 1.5 in ID - 1.75 in OD - $2.00 Thread Hand: Right Hand Thread that go with them. They do have a tack mark on them from being tacked to my mock up control arms but they were never fully welded. The whole package new from Ballistic Fab cost me $24.19 before tax and freight. I would be happy if I could get $20.00 a pair. I will pay UPS ground to ship them to you unless you live in
the Portland area then I will deliver.
http://i386.photobucket.com/albums/oo310/allen_wrench1000/naxjaforsale004.jpg
http://i386.photobucket.com/albums/oo310/allen_wrench1000/naxjaforsale005.jpg
I have a Radiator that came out of a 98 XJ with an automatic. The jeep was in a wreck. I took it out because I thought it was part of my cooling problem well needless to say I was wrong. It does have some spots were the electric fan fell into it and belt some of the fins but the water rails seem to be fine. It is bent just a little bit but mounted up just fine and held water at 16lbs of pressure. I will guarantee this Radiator will not leak if it does I will give you your money back. I am asking $15 for it OBO.
http://i386.photobucket.com/albums/oo310/allen_wrench1000/naxjaforsale006.jpg
http://i386.photobucket.com/albums/oo310/allen_wrench1000/naxjaforsale007.jpg
http://i386.photobucket.com/albums/oo310/allen_wrench1000/naxjaforsale008.jpg
Last but not least is a New High lift jack cover. It does not fit my 60" jack it measures out to 53" so I bought a Neopream cover for mine. It has never been used and as been in the bottom of my tool box for two years. The cheapest I found this product online for was $25 and change. I would be will to take $20 for it and I will ship it.
http://i386.photobucket.com/albums/oo310/allen_wrench1000/naxjaforsale003.jpg
Let me know what you think and if you have any questions I can answer them.