Np231 sye, 4.0 h.o., auto trans, drivelines

[Xclusivexj]

Hey guys I'm parting out one of my xjs. It has about 120k miles ran awesome when I robbed the axles and a few other goodies. It is a 1993 has the 4.0 ho, auto and a 231 with sye and both drive lines. I'm looking for cash or a set of good 35 to 37 inch mud tires must be 15s. Would prefer Iroks but let me know what u have. Also maybe lockers for 8.8 or Dana 30 chromos? or a winch. Or cash is always great. Offers

[BenDiesel]

What part of orgon and how mych ya want for the 231 and drive line? How much lift are they for and who makes the sye?

[Xclusivexj]

What part of orgon and how mych ya want for the 231 and drive line? How much lift are they for and who makes the sye?

It's an rubicon express with I believe a tom woods driveline. The lift was a 5.5 rubicon kit. I live 10 from Eugene in veneta. Im thinkin 350 for the tcase and both drivelines.

[BenDiesel]

well i was hopeing more for a replace style sye rather then a hack n tap. Would you be willing to sell just the shafts? Got any indecations as to if its a tomwoods?

[Xclusivexj]

well i was hopeing more for a replace style sye rather then a hack n tap. Would you be willing to sell just the shafts? Got any indecations as to if its a tomwoods?

Ya I might do that. I would rather sell it all. It was a Tom woods but I broke it and had 6 states rebuild it I'm not sure what all was replaced it's been a while. Is there a big benefit over the hack and tap? Just wondering because I ran 36 rocks on this tcase with jeep axles and then went to tons and 40s and never had any issues. Anyway what would u be willing to give for the drivelines?

[jonesinxj]

IIRC...Depending on the year of that the Tcase came off of, there really isnt any benefit as long as it was done right.

With the Older years (pre 96... correct me someone if im wrong) there was a additional seal that needed to be installed and the nose cone removed and reinstalled to work.

[Xclusivexj]

IIRC...Depending on the year of that the Tcase came off of, there really isnt any benefit as long as it was done right.

With the Older years (pre 96... correct me someone if im wrong) there was a additional seal that needed to be installed and the nose cone removed and reinstalled to work.

It was def done right. I put a lot of trail time on it with no issues or leaks

[Fastdemise]

I'd be interested in the 231 if there is no issue of it working on my 2001 and just the rear driveshaft if possible. If not willing to split I'll consider everything.

[Xclusivexj]

I'd be interested in the 231 if there is no issue of it working on my 2001 and just the rear driveshaft if possible. If not willing to split I'll consider everything.

As far as I know they are both 23 spline

[BenDiesel]

Would ya take 300 for the whole kit? Tcase and lines? Do you think you or some near you get to portland before jonesinxj to bring it up lol. Is the chain in good shape?

[redrider2911]

Oh hey. What shape the body of the rig in?!

[Fastdemise]

Curse you Ben!! I'll call 2nd dibs and wait patiently.

[Xclusivexj]

I don't go up to Portland much but I am looking for tires so if I find some in ptown I might be able to do that. As far as the price I'll have to think it over tonight and let u know.

As for the body of the jeep ummmm lol it's been wheeled good for 3 yrs so there are sone dents and it is seriously trimmed from the fodies it's also comp cut but needs finished. In other words it's used as $@&$ but is fine for a wheeler if the door was fixed.

[Xclusivexj]

I'll take 300 for it but I cant get it to Portland. I would like to get rid of it asap because I found some tires so I could use the extra cash. The splines need cleaned up on the driveline it's just rusty so it doesn't slide to well. I would clean them up but I have a broken leg so it's kinda hard to hobble around and accomplish anything

[BenDiesel]

Thanks for the consideration but without being able to do the parts train shipping would cost to much so I'm gona let fastdemise take it

[Fastdemise]

I will grab them from you no problem. I'm free all tomorrow so just let me know. I'll pick up everything for $300

Call/txt me 843-364-2877

[Xclusivexj]

Thanks for the consideration but without being able to do the parts train shipping would cost to much so I'm gona let fastdemise take it

Ya no problem man thanks anyway.

[Xclusivexj]

Thanks for the sale fastdemise. Transfercase and drivelines sold still have motor and trans