4.5" Lift

So, I'm collecting pieces parts for my 4.5" lift. Have a set of BDS springs. Picking up Brake Hoses next.

Looking at NAPA I find these part numbers:
STOCK
UP38894 Right Side Brake Hose 16.25"
UP38895 Left Side Brake Hose 16.125"
up380038 Rear Brake Hose 13.25"

I'm thinking of using
UP38620 Left Side 21.5"
UP38621 Right Side 21.0"
UP36849 Rear 19.75"

Total cost is $66.86 plus the tax. A lot less than iffy braided steel lines...

Comments, concerns or complaints?

thats what i usually do for brake hoses.

the the rear i use a 99 dodge dakota brake hose. its more than enough

for the fronts i dont remember what i use but they are 26" long and with the hard lines straightened out i use every inch of them.

gotta compensate for the added travel with the taller suspension and longer shocks.

I used rear from a 96 4x4 Dakota.It's 6in longer than stock and is a direct bolt on.

I checked both of these ideas.

NAPA says that the 99 Dakota is metric...

The 96 looks to be an acceptable match at 22.25" which is 9" longer than stock. The front part numbers I showed are for a Chevy 1500.

i believe chevy truck brake hoses work for the front. not sure what years tho

Common ones used

Fronts:
95 GMC c1500 2wd lines
Left - Napa PN #38620
Right - Napa PN #38621


Rear:
96 Dakota rear lines
91+ YJ passengerside for ebrakes