joelpop1
NAXJA Forum User
- Location
- kalispell mt
Hi, I have a code 12(bat) and 27(fuel inj.) and a on again and off again miss on #5. new cts, cap, rotor, wires and plugs. any thoughts? thanks
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
code 27 fix? for 92 MT
- Thread starter joelpop1
- Start date
joelpop1
NAXJA Forum User
- Location
- kalispell mt
Re: code 27 fix? for 92 MT do I need injectors?
do I need injectors
do I need injectors
joelpop1
NAXJA Forum User
- Location
- kalispell mt
do i need fuel pump?
joe_peters
NAXJA Forum User
- Location
- Grants Pass, OryGun
Slow down, take a breath.
Ok, your problem could be a number of things.
Lets see if you can test your way to the solution.
Just for grins and giggles, go to the PCM and remove the 60 pin connector. Using a commercial contact cleaner, clean the pins of the PCM and the cavities on the connector. Now, treat them with some dielectric grease and reassemble.
Symptoms still there? Still getting the code?
Ok, your problem could be a number of things.
Lets see if you can test your way to the solution.
Just for grins and giggles, go to the PCM and remove the 60 pin connector. Using a commercial contact cleaner, clean the pins of the PCM and the cavities on the connector. Now, treat them with some dielectric grease and reassemble.
Symptoms still there? Still getting the code?