Replacement Fuel Injectors

[CharlesS]

A year or so back I started searching for a good quality set of replacement fuel injectors for my '98 XJ 4.0L. At the time the consensus was Precision Auto Injectors had the best deal of around $150 a set for injectors with the EV1 connection.
From the videos and reviews PAI provides outstanding quality products with great performance. but unfortunately the price has increased by 200% due to availability.
Can anyone suggest a source of replacement fuel injectors with similiar quality?

http://www.precisionautoinjectors.com/category.sc;jsessionid=02BAA5F84BA58E94794411A998D 6BCFF.qscstrfrnt01?categoryId=3

[julio_a]

i have a 93 and went with precision, but also heard about these guys while i was searching around.

http://www.fiveomotorsport.com/fuel-injectors/jeep/

i have no experience with them mind you, just kept the link for future use.

[962drrhino]

If you find the part #'s for the injectors your looking for, you can order them off ebay for cheap. Buddy of mine purchased a set of 8 ford injectors rebuilt from ebay for about $60 shipped. Injectors function flawlessly.

[CherBear]

http://cgi.ebay.com/ebaymotors/4-BOSCH-Jeep-Cherokee-EV1-24lb-Fuel-Injectors-NEW-_W0QQcmdZViewItemQQitemZ350204328751QQptZRaceQ5fCa rQ5fParts#ht_1383wt_939

bid quick

EDIT: only a 4 set.

Part number: 0280156013

[CharlesS]

Talked with Five O tech early today...
They have good a tech support dept...

Probably wont get them until after I get back from Moab.

Thanks for the link.

Charles

[XJCasper]

Are Ford Injectors physically direct replacements?

[CharlesS]

Yes.... Just make sure you get the correct flow/pressure ratings along with the proper electrical connector for your year and engines needs.

[XJCasper]

Thank you

[Wayne Sihler]

I purchased two sets of injectors for my 96 from 5oMotorsports.Put them in before leaving for Moab in 2008. Have had no trouble with them at all.

You will need to clean the port hole in the intake manifold,remove the carbon build up, because the end is a larger diameter than the stock injector.IIRC a .45 cal bore brush cleaned the carbon out just fine.

As for the 2 sets- the tech who put them in FUbared the job on the first try. Then we cleaned the carbon out.

Wayne

[CharlesS]

Installing them before the Moab trip was a good test to compare performance and gas mileage differences.