Just pulled the old ones, and can't even get to installing the new ones. I'm having issues getting the pin through the bushings on the new shocks. Any ideas? I pulled the bushing out and put the pin through it and am now trying to get the pin/bushing back into the shock with no success.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Rear shock help
- Thread starter DT|Ac1d
- Start date
2stix
NAXJA Forum User
- Location
- fallbrook Ca.
put the rubber bushing in first, then press the pin through with a little liquid soap on the bushing inner. i use a vise with either a steel tube or an old (cheap) deep socket that will allow the pin to go in the tube, but the tube edge presses against the rubber bushing.
