• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

AA SYE Help

4LVLFWD

NAXJA Forum User
Location
Vegas
The front yoke has a rubber washer/seal looking thing on the shaft. the kit came with a new one. it seems like the oe one doesnt want to come off. its supposed to be replaced right? im thinking of burnin it off. any other suggestions
 
ok got that taken care of. Now... when i went to put on the snap ring for the speedo gear on the new output shaft, it seemed to have stretched and is not snug on the output shaft. is that ok or do i need it to be snug? thanks
 
if the snap ring can spin but not move it should be alright, but if it seems to want to allow movement of either the gear or the snap ring i would look into replacing it.
 
Back
Top